Follow these easy steps to get your AEG FAVORIT 88400 I Dishwasher up and running in no time.
Ensure the appliance is installed below and adjacent to safe structures. Avoid installing the appliance where the temperature is less than 0°C. Follow the installation instructions provided with the appliance.
Connect the water inlet hose to a water tap with a 3/4'' thread. Make sure not to damage the water hoses. Before connecting to new pipes or pipes not used for a long time, let the water flow until it is clean to avoid blockages.
Ensure access to the mains plug after installation. Do not pull the mains cable to disconnect the appliance; always pull the mains plug.
Set the water softener according to the water hardness in your area, which can be obtained from your local water authority. Adjust it manually by turning the water hardness dial to position 1 or 2.
Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt and remove any salt around the container opening. Turn the cap clockwise to close the salt container.
Fill the rinse aid dispenser and adjust the released quantity of rinse aid according to your needs.
Start the shortest programme with a rinsing phase, without detergent and without dishes, to ensure everything is functioning correctly and there are no leaks.